The Microwriter MW4 (circa 1980), as used by Douglas Adams, features a chording keyboard
Physically, a keyboard is an arrangement of buttons, or keys. A keyboard typically has characters engraved or printed on the keys; in most cases, each press of a key corresponds to a single written symbol. However, to produce some symbols requires pressing and holding several keys simultaneously or in sequence; other keys do not produce any symbol, but instead affect the operation of the computer or the keyboard itself. See input method editor.
A majority of all keyboard keys produce letters, numbers or signs (characters) that are appropriate for the operator's language. Other keys can produce actions when pressed, and other actions are available by the simultaneous pressing of more than one action key.
Designs
Keyboard layouts
There exists a large number of different arrangements of symbols on keys. These different keyboard layouts arise mainly because different people need easy access to different symbols; typically, this is because they are writing in different languages, but specialized keyboard layouts for mathematics, accounting, and computer programming also exist.
Most of the more common keyboard layouts (QWERTY-based and similar) were designed in the era of the mechanical typewriters, so their ergonomics had to be slightly compromised in order to tackle some of the technical limitations of the typewriters. The letters were attached to levers that needed to move freely; because jamming would result if commonly-used letters were placed too close to one another Christopher Sholes invented the QWERTY layout. However, with the advent of modern electronics, this is no longer an issue. QWERTY layouts and their brethren had been a de facto standard for decades prior to the introduction of the very first computer keyboard, and were primarily adopted for electronic keyboards for this reason. Alternative layouts do exist, the best known of which are the Dvorak and more recently Colemak layouts; however, these are not in widespread use.
The number of keys on a keyboard varies from the standard of 101 keys introduced in the late 1980s to the 104-key windows keyboards and all the way up to 130 keys or more, with many of the additional keys being symbol-less programmable keys that can simulate multiple functions such as starting a web browser or e-mail client. There also were "Internet keyboards," sold in the late 1990s, that replaced the function keys with pre-programmed internet shortcuts. Pressing the shortcut keys would launch a browser to go to that website.
Connection types
This photograph shows a QWERTY keyboard dismantled, with all of the keys properly removed, during the cleaning process.
There are several different ways of connecting a keyboard which have evolved over the years. These include the standard AT (DIN-5) connector commonly found on pre-80486 motherboards, which was eventually replaced by the PS/2 and USB connection. Prior to the iMac line of systems, Apple Computer used ADB, a proprietary system, for its keyboard connector.
Wireless types
Wireless keyboards have become popular for their increased user freedom. However, a wireless keyboard needs batteries to work and may pose a security problem due to the risk of eavesdropping
A wireless keyboard often includes a required combination transmitter and receiver unit that attaches to the computer's keyboard port (see Connection types above). The wireless aspect is achieved either by radio frequency (RF) or by infrared (IR) signals sent and received from both the keyboard and the unit attached to the computer. A wireless keyboard may use an industry standard RF, called Bluetooth. With Bluetooth, the transceiver may be built into the computer.
Buckling spring vs. dome switch
Keys on older IBM keyboards were made with a "buckling spring" mechanism, in which a coil spring under the key buckles under pressure from the user's finger, pressing a rubber dome, whose inside is coated with conductive graphite, which connects two leads below, completing a circuit. This produces a clicking sound, and a "positive" feel of feedback, so that the typist knows when the key is fully pressed. Keys on most modern keyboards are made with a so-called "dome switch" mechanism, without the buckling spring. Many typists prefer the buckling spring board, which is still manufactur
No comments:
Post a Comment